home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
newsgroups
/
misc.20010921-20020314
/
000249_r..collins@sympatico.ca_Tue Dec 18 11:56:31 EST 2001.msg
< prev
next >
Wrap
Text File
|
2002-03-13
|
4KB
|
112 lines
Article: 13074 of comp.protocols.kermit.misc
Reply-To: "Rick Collins" <r..collins@sympatico.ca>
From: "Rick Collins" <r..collins@sympatico.ca>
Newsgroups: comp.dcom.modems,alt.sys.pc-clone.gateway2000,comp.protocols.kermit.misc
References: <9vn159$1li$1@news.panix.com>
Subject: Re: More Tweak of USR X2 GW 87174902
Lines: 86
MIME-Version: 1.0
Content-Type: text/plain;
charset="Windows-1252"
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2600.0000
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000
Message-ID: <QsFT7.20874$NC5.1432694@news20.bellglobal.com>
Date: Tue, 18 Dec 2001 06:06:39 -0500
NNTP-Posting-Host: 64.230.33.208
X-Complaints-To: abuse@sympatico.ca
X-Trace: news20.bellglobal.com 1008673712 64.230.33.208 (Tue, 18 Dec 2001 06:08:32 EST)
NNTP-Posting-Date: Tue, 18 Dec 2001 06:08:32 EST
Organization: Bell Sympatico
Path: newsmaster.cc.columbia.edu!panix!howland.erols.net!torn!webster!nf1.bellglobal.com!nf2.bellglobal.com!news20.bellglobal.com.POSTED!not-for-mail
Xref: newsmaster.cc.columbia.edu comp.dcom.modems:310629 alt.sys.pc-clone.gateway2000:235468 comp.protocols.kermit.misc:13074
<vjp2@biostrategist.com> wrote in message
news:9vn159$1li$1@news.panix.com...
> ----------
> (2) Win98 Error Log
> 12-16-2001 20:18:03.37 - Sportster 56k Data Fax in use.
> 12-16-2001 20:18:03.56 - Modem type: Sportster 56k Data Fax
> 12-16-2001 20:18:03.56 - Modem inf path: MDMUSRK1.INF
> 12-16-2001 20:18:03.56 - Modem inf section: Modem99
> 12-16-2001 20:18:03.97 - 115200,N,8,1
> 12-16-2001 20:18:04.36 - 19200,N,8,1
Make sure the modem has 115200 set as the port speed in all
connectoids.
> 12-16-2001 20:18:04.39 - Initializing modem.
> 12-16-2001 20:18:04.39 - Send: ATE0Q0V1<cr>
> 12-16-2001 20:18:04.40 - Recv: ATE0Q0V1<cr>
> 12-16-2001 20:18:04.52 - Recv: <cr><lf>OK<cr><lf>
> 12-16-2001 20:18:04.52 - Interpreted response: Ok
> 12-16-2001 20:18:04.52 - Send: AT&F1E0Q0V1&C1&D2&A0S0=0<cr>
The &A0 is why you're not displaying error correction or data
compression - make sure you've got those checked in Modem Properties -
you want them. This value should be &A3.
> 12-16-2001 20:18:04.66 - Recv: <cr><lf>OK<cr><lf>
> 12-16-2001 20:18:04.66 - Interpreted response: Ok
> 12-16-2001 20:18:04.66 - Send: ATS7=60S19=0M0&M4&K1&H1&R2&I0B0X4<cr>
Get rid of this "Extra settings" garbage. They're all defaults set by
AT&F1 except for the M0.
> 12-16-2001 20:18:04.81 - Recv: <cr><lf>OK<cr><lf>
> 12-16-2001 20:18:04.81 - Interpreted response: Ok
> 12-16-2001 20:18:04.91 - Dialing.
> 12-16-2001 20:18:04.91 - Send: ATDT;<cr>
> 12-16-2001 20:18:06.69 - Recv: <cr><lf>OK<cr><lf>
> 12-16-2001 20:18:06.69 - Interpreted response: Ok
> 12-16-2001 20:18:07.24 - Dialing.
> 12-16-2001 20:18:07.24 - Send: ATDT###########<cr>
> 12-16-2001 20:18:25.58 - Recv: <cr><lf>CONNECT 19200<cr><lf>
The &A0 is why the modem isn't reporting error correction and data
compression here.
> 12-16-2001 20:18:25.58 - Interpreted response: Connect
> 12-16-2001 20:18:25.58 - Connection established at 19200bps.
>
> 12-16-2001 20:18:25.59 - Error-control off or unknown.
> 12-16-2001 20:18:25.59 - Data compression off or unknown.
Which leads to the above.
> ----------
> (3) Kermit for Sportser Script extracts
> output ATQ0V1\13 ; Enable word result codes
> output ATE1X4&A3&D2\13 ; Set echoing, result codes, etc.
> output AT&B1\13 ; Fixed interface speed
> output AT &H1&R2\13 ; RTS/CTS hardware flow control
> output AT &N0\13 ; Enable modulation fallback
> output AT &K1&M4\13 ; Compression and EC enabled
Everything up to here is properly configured with AT&F1. Replace the
above with
output AT&F1\13
> output AT &Y3\13 ; Make modem pass BREAK
transparently
&Y3 isn't shown in my summary of commands. The default is &Y1, but you
probably want &Y2.
> ----------
> (4) ComitW Modem Parameters file (set one up for reset=&f1 but
fails)
> MODEM=U.S. Robotics Sportster
> RESET=AT&F
The above should be AT&F1
> INIT=AT&F1S0=0
That should be all you need.